Download Centre
Looks like you don't have ESC button on your device
Download IronCAD DCS
Choose one of the following options
trial versionHas a licenseX
Looks like you don't have ESC button on your device
Choose one of the following options
trial versionHas a licenseBasic training in WoodLAB is usually carried out at the customer's premises. It is most suitable as we can work connected to the customer's CNC machine and its tools with the customer's wishes for setup on site.
Start of the course:
Last day to register:
Number of seats:
Available
Limited
Few
No vacancy
Price:
Contact us for prices
Limited
Few
Basic training in WoodLAB is usually carried out at the customer's premises. It is most suitable as we can work connected to the customer's CNC machine and its tools with the customer's wishes for setup on site.
Start of the course:
Last day to register:
Number of seats:
Available
Limited
Few
No vacancy
Level:
Beginners
Level:
Beginners
Level:
Beginners
Level:
Beginners
Length:
Varies
Number of films:
X
11 min 56 sec
Review of the basics of creating a new plate in IRONCAD. The shapes Stock, Curved Stock, Conic Stock and settings.
Exercise 1 | Sheet Metal i IRONCAD
Review of the basics of creating a new plate in the IRONCAD
11 min 56 sec
5 min 56 sec
Builds a simple bent plate and at the same time goes through features like Add Stock, Add Curved Stock, Vertex Fillet and Vertex Chamfer.
Exercise 2 | Sheet Metal i IRONCAD
Build a simple bent sheet metal...
5 min 56 sec
7 min 55 sec
Continues on the curved plate, adding curves and going through its settings.
Exercise 3 | Sheet Metal i IRONCAD
Add curves to the curved plate
7 min 55 sec
4 min 43 sec
We continue with ticks, here Bend with Stock and the setting Associate to Attached Edge End.
Exercise 4 | Sheet Metal i IRONCAD
Bend with Stock and the setting Associate to Attached Edge End
4 min 43 sec
9 min 29 sec
Review of Bend without Autosize, copying Bend, Relief, Punches and settings for building a sheet metal box.
Exercise 5 | Sheet Metal i IRONCAD
Review of Bend without Autosize, copying Bend, Relief...
9 min 29 sec
7 min 38 sec
We build a lid with different Bend features and use Punches to make holes.
Exercise 6 | Sheet Metal i IRONCAD
Sheet metal lids with different Bend features
7 min 38 sec
4 min 23 sec
Finishing the plates for the box with Punches and Forming Stamps.
Exercise 7 | Sheet Metal i IRONCAD
Preparing the plates for the box
4 min 23 sec
10 min 30 sec
We go through different variations to copy Bend features and use the handles to adjust the length of the sheet.
Exercise 8 | Sheet Metal i IRONCAD
Different variants to copy Bend features
10 min 30 sec
9 min 13 sec
Bending sheet metal around two blocks and testing different variations of Bend features and reviewing how they work. Uses the handles to adjust the shape of the bends.
Exercise 9 | Sheet Metal i IRONCAD
Bending sheet metal around two blocks
9 min 13 sec
10 min 4 sec
We build a paper holder in sheet metal. Working with the tools in Sketch and Bend features.
Exercise 10 | Sheet Metal i IRONCAD
Build a sheet metal paper holder
10 min 4 sec
9 min 46 sec
Close and straighten corners with the Add Closed Corner and Add Miter Flange tools and customize bends.
Exercise 11 | Sheet Metal i IRONCAD
Closing and creating straight corners
9 min 46 sec
8 min 5 sec
We go through how to convert "regular part" to a Sheet Metalpart and use Sketched Bend to create bends.
Exercise 12 | Sheet Metal i IRONCAD
Convert part to sheet metal
8 min 5 sec
8 min 11 sec
We create a bracket around a VKR pipe with Loftad sheet metal.
Exercise 13 | Sheet Metal i IRONCAD
Lofting a plate
8 min 11 sec
8 min 22 sec
We create a transition between two parties with Loft Sheet Metal.
Exercise 14 | Sheet Metal i IRONCAD
Lofting sheet metal between two parts
8 min 22 sec
6 min 49 sec
We crop a plate with the help of other parts in the 3D scene.
Exercise 15 | Sheet Metal i IRONCAD
Pruning a plate with the help of other parts
6 min 49 sec
13 min 29 sec
We create our own Forming Tool.
Exercise 16 | Sheet Metal i IRONCAD
Create Forming Tool
13 min 29 sec
10 min 53 sec
We build a cover for a receiver.
Exercise 17 | Sheet Metal i IRONCAD
We build a cover for a receiver.
10 min 53 sec
5 min 14 sec
We build a protective cover over a coupling with Bend features.
Exercise 18 | Sheet Metal i IRONCAD
Protective cover with Bend features.
5 min 14 sec
5 min 56 sec
We build the same cover but with different tools - Loft Sheet Metal and Press Bend.
Exercise 19 | Sheet Metal i IRONCAD
Loft Sheet Metal and Press Bend
5 min 56 sec
7 min 32 sec
We build a ventilation hood over a welding bench using the Convert Sheet Metal tool part.
Exercise 20 | Sheet Metal i IRONCAD
Convert Sheet Metal part
7 min 32 sec
7 min 16 sec
Finishes the ventilation hood with Bend features and uses profile handles to adjust the bends.
Exercise 21 | Sheet Metal i IRONCAD
Completing the ventilation hood with Bend features
7 min 16 sec
5 min 40 sec
We are building a sheet metal cabinet. Here we start with the outer sheet and use the Add Miter Flange tool to copy bends around the sides.
Exercise 22 | Sheet Metal i IRONCAD
We build a metal cabinet
5 min 40 sec
5 min 15 sec
Manufactures the back of the cabinet and uses the profile handles to adjust the size and position of the panel.
Exercise 23 | Sheet Metal i IRONCAD
Making the back of the cabinet
5 min 15 sec
4 min 10 sec
Making the base plate of the cabinet and using Add Closed Corner to close the corners and make them even.
Exercise 24 | Sheet Metal i IRONCAD
Making the bottom plate of the cabinet
4 min 10 sec
11 min
Manufactures the door and inserts the hinges. Uses the profile handles to adjust the size and position of the door.
Exercise 25 | Sheet Metal i IRONCAD
Making the door and inserting the hinges.
11 min
13 min 13 sec
We use the Code Generator tool on an unbuckled plate to add information to the dimensional and cutting drawing.
Exercise 26 | Sheet Metal i IRONCAD
Adding information on dimensional and cutting drawings
13 min 13 sec
This course focuses on effectively integrating WoodLAB with IRONCAD for a smooth and seamless work process. We will explore the interface, program structure and principles for creating wooden structures and furniture. The course starts with the purchase of a license to WoodLAB. An education in WoodLAB varies in length depending on the customer's prior knowledge and computer experience and how advanced the CNC machine (how many axes) is to be controlled. We are happy to discuss arrangements with you regarding this, do not hesitate to contact us to see what conditions you have.
Take the opportunity to register for this course! Registration is not binding.
Level
Beginners
Length
Varies
Level
Beginners
Level
Beginners
Interested in attending this course?
Send us an expression of interest and we will contact you.
Level
Beginners
Level
Beginners
Level
Beginners
Length
Varies
Get a first overview of the interface and icons.
16:46 min
Use the camera and build a simple brick model via drag-and-drop.
06:51 min
Use the camera and build a 3D model with features.
09:23 min
The teacher for this course is Jonas Bryntesson. With 20 years of work experience at Solidmakarna AB, Jonas has developed expertise in product development and design. He is a prominent expert in IRONCAD and 3D CAD, and his deep knowledge makes him a highly sought-after advisor.
Jonas has successfully trained over 800 people in IRONCAD and is known for his teaching skills. Jonas Bryntesson is an experienced and respected trainer who is dedicated to helping others improve their CAD skills.
Fredrik Johansson is a McNeel certified level 2 instructor with 20 years of experience in Rhinoceros 3D. As a highly qualified professional, he has held a large number of courses for various companies, including SVT, H&M, the Royal College of Art and more.
In addition to his teaching experience, Fredrik has developed customized course materials that complement the McNeel literature. He also offers many assignments for self-study. With a background in set design, construction and product development, Fredrik brings a wealth of practical knowledge to his role.
Interested in attending this course?
Send us an expression of interest and we will contact you.
Do not hesitate to contact us!
Download Centre
The support blog
Frequently asked questions
Installation manuals
License activation
Computer specification
